1.9L Retainer 89.50
| HOLDING RETAINER 1.9L ENGINE USED TO PREVENT THE ENGINE FROM ROTATING WHILE INSTALLING AND REMOVING THE PULLEY RETAINING BOLT.
MADE IN GERMANY
|
10 Piece Metric Hex Set 39.50
| 10 Piece 3/8'' Drive Metric Hex Bit Socket Set
Heat treated Chrome Vanadium steel construction.
Sizes are: 2, 3, 4, 5, 5.5, 6, 7, 8, 9 & 10mm
Set comes on a rail as shown.
Excellent for the German car lover!
|
100 pc Security Bit Set 16.99
| 100 Piece
Security Bits Set: Contains many of the most common tamperproof type security
bit sizes,
including torx bits, spanner bits, hex bits, tri wing bits, and special XZN
bits. Includes items below...
1
wing nut driver.
1 magnetic bit holder.
1 socket bit holder.
1 1/4" sq. x 1/4" hex x 1" extension.
1 1/4" sq. x 1/4" hex x 2" extension.
3 clutch bits ( 1, 2 & 3)
3 torq bits ( 6, 8 & 10)
3 XZN (spline) bits (M5, M6 & M8)
4 tri wing bits ( 1, 2, 3 & 4)
4 square recess bits ( 0, 1, 2 & 3)
4 spanner bits ( 4, 6, 8 & 10)
6 metric hex tamper proof bits (2, 2.5, 3, 4, 5 & 6)
6 SAE hex tamper proof bits (5/64, 3/32, 7/64, 1/8, 9/64 & 5/32)
8 phillips bits (0, 1, 2{5} & 3)
8 pozi drive bits (0, 1, 2{5} & 3)
9 slotted bits (3, 4, 4.5, 5, 5.5, 6, 6.5, 7 & 8)
9 metric hex bits (1.5, 2, 2.5, 3, 4, 5, 5.5, 6 & 8mm)
9 torx bits (T 8, 10, 15, 20, 25, 27, 30, 35 & 40)
9 torx tamper proof bits (T 8, 10, 15, 20, 25, 27, 30, 35 & 40)
10 SAE hex bits (1/16, 5/64, 3/32, 7/64, 1/8, 9/64, 5/32, 3/16, 7/32 &
1/4)
For the
German Car mechanic this set is worth the price because of the Torx and XZN (spline)
bits (XZN sizes 5mm, 6mm and 8mm) these three small XZN bits are very hard to
find in this short pattern.
You can see these 3 bits on the right hand side second row from the bottom.
Comes complete as shown with (indexed) storage / carry case.
|
10mm Glow Plug Socket 69.99
| 10mm Universal Glow Plug Socket mainly for VW Audi Diesel Injection TDI 3/8 Drive.
High quality tool
Made in Germany by Hazet!
DETAILS: ALFA ROMEO, AUDI, CHRYSLER, FIAT, FORD, MERCEDES, LAND ROVER, RENAULT, SEAT, VOLKSWAGEN.
|
10mm Triple Square Headbolt Tool 24.99
| Headbolt Tool
Triple Square XZN Socket M10
12 Point Socket 1/2 Drive Super High Quality Tool!
|
12mm Adjustment Tool 45.95
| 12mm Jam Nut Valve Adjustment Tool
Designed for a wide variety of cars with 12mm jam nut valve adjustment screws.
This two in one tool has a window in its socket so the technician can see the position of the screwdriver blade holding the
adjustment screw as the jam nut is tightened.
This visual contact in addition to the feel of holding the screwdriver
The unique handle pivots from one side to the other, so the window is always visible.
|
12mm Glow Plug Socket 69.98
| 12mm Universal Glow Plug Socket
6 Point Socket (with ball clamp)
chrome plated, square drive nominal size 10 = 3/8 inch,
with hinge joint, for 12 mm glow plugs esp. on
MERCEDES BENZ 201 and 202 with 4 valve,
also on OPEL, BMW
CITROEN, FIAT, FORD, HONDA, NISSAN, PEUGEOT, RENAULT, ROVER, TOYOTA, VOLKSWAGEN.
High quality tool Made in Germany by Hazet!
|
12mm Triple Square Headbolt Tool 24.99
|
| Headbolt Tool
Triple Square XZN Socket M12
12 Point Socket 1/2 Drive Super High Quality Tool!
|
13 x 14mm Drain Plug Wrench 72.98
| 13 x 14mm Drain Plug Wrench.
World Class Hazet Tools Made in Germany!
|
13 x 14mm Drain Plug Wrench 72.98
|
| 13 x 14mm Drain Plug Wrench.
World Class Hazet Tools Made in Germany!
|
13 X 15mm Distributor Wrench 9.50
| OFFSET DISTRIBUTOR CLAMP WRENCH 13 & 15mm. Use tool by itself or turn with 3/8" Dr. ratchet. Drop forged steel construction. Chrome plated to resist corrosion.
13mm Applications: 1981 & later Ford V6 (3.8L) engines, 1984 1988 Ford Tempo & Topaz 2.3L HSC vehicles, 1986 & later GM Blazers with V6 (2.8L) engines. 15mm Applications: GM "X" body cars with V6 (2.8L) engines. 1982 & later Cadillac V8 (4.1L) engines, GM V6 (2.8L) engines, and 1985 VW Golf.
|
13mm WRENCH 39.75
| 13MM T WRENCH USED TO REMOVE AND INSTALL ALTERNATOR BRACKET/COOLING PUMP ON DIESEL ENGINES
|
14 x 17mm Drain Plug Wrench 63.98
| 14 x 17 Drain Plug Wrench.
World Class Hazet Tools Made in Germany!
|
14 x 17mm Drain Plug Wrench 63.98
|
| 14 x 17 Drain Plug Wrench.
World Class Hazet Tools Made in Germany!
|
17 x 17 Injection Wrench 59.50
| Double Ended Flare Nut Box Wrench Size 17 x 17mm
Overall Length 241mm (9.5 inch)
For injection pipes on Volkswagen / Audi
This tool will help you when you remove and install the fuel lines from the injection pump and the injectors themselves.
For TDI: You will still need to torque the 17mm fittings down to spec, but this tool will make taking the fittings off a snap, as well as putting them back on.
This is a Factory Tool Made in Germany
|
17 x 17 Injection Wrench 59.50
|
| Double Ended Flare Nut Box Wrench Size 17 x 17mm
Overall Length 241mm (9.5 inch)
For injection pipes on Volkswagen / Audi
This tool will help you when you remove and install the fuel lines from the injection pump and the injectors themselves.
For TDI: You will still need to torque the 17mm fittings down to spec, but this tool will make taking the fittings off a snap, as well as putting them back on.
This is a Factory Tool Made in Germany
|
17X19 Open End Wrench 15.99
| German Made quality 17x19mm Double Open End Metric Wrench.
Overall Length 6 3/4 inch.
High Quality Tools from ZDMAK!
|
19mm Suspension Strut Socket 59.95
| Special 19mm Tube Socket
Used for securing the Strut tower retaining nut of select European models
(crucial when adjusting tension of front shocks).
The 2/3 open side walls of this socket allows for easy access of an adjusting wrench.
(normally 7mm Allen Hex Wrench)
For removing and installing front strut unit on VW Audi 19mm nut.
This tool is often used in conjunction with a pin wrench / allen wrench or both.
|
2 Piece Set 58.99
| Set used for removing/installing lock carrier on hood.
Brand new factory tools Made in Germany.
|
2 Piece Socket Set 35.00
| 22mm Special Tube Socket 4491A Plus Pin Wrench VW524
Used for securing the Strut tower retaining nut of most European models
(crucial when adjusting tension of front shocks). The 2/3 open side walls of
this socket allows for easy access of an adjusting wrench.
(normally 7mm Allen Hex Wrench)
Also for R&R of Oxygen Sensor.
VW524 Pin Wrench Socket with 1/2" drive. This tool is used for R&R of
grooved ring retaining nut on strut tower of front shock absorber.
Also used for adjusting power steering gear on VW Jetta, Golf, GTI.
|
2 Pins and 2 Plates 103.00
| 2 Pins and 2 Plates Set of four tools.VW Audi T.D.I. and New Beetle Cam Kit Reference numbers for the two tools on the left are: 3418 and 3359. Tool Set for factory correct and trouble free installations. This is a popular set for Diesel timing of Bosch injection pumps. This set has been developed for aligning the cam shaft with the Diesel pump on 1998 and newer VW models equipped with a T.D.I. engine. This two piece lock plate and alignment pin allows the technician for factory correct and trouble free installations.
Tools on the right side of image are Diesel Lock Plate / Cam Setting Bar Same as Volkswagen ref 2065a Tool used for securing the cam shaft from rotating and maintaining correct timing position engine AAZ during R&R of cam shaft drive belt. Applicable: VW/Audi diesel and Volvo 6 cylinder 2.4L diesel 1981 86 Lock Pin for Diesel (Same as VW tool 2064). Tool used for securing Bosch diesel injection pump sprocket from rotating during R&R of cam shaft drive belt. This Locking Pin also assists in locating the general timing position of pump. Volkswagen Audi diesel and Volvo 6 cylinder 2.4L diesel 1981 86 All 4 tools are High Quality Made in Europe!
|
2 Thumbwheel Ratchets 14.99
| Set of 2
Thumbwheel Ratchets 3/8 plus 1/4 inch.
Lifetime Warranty.
|
21mm Suspension Strut Socket 59.95
|
| Special 21mm Tube Socket
Used for securing the Strut tower retaining nut of select European models
(crucial when adjusting tension of front shocks).
The 2/3 open side walls of this socket allows for easy access of an adjusting wrench.
(normally 7mm Allen Hex Wrench)
For removing and installing front strut unit on VW Audi 21mm nut.
This tool is often used in conjunction with a pin wrench / allen wrench or both.
|
22mm Socket plus 7mm Allen Wrench 29.99
| 2 Piece set
22mm Special Tube Socket 4491A plus 7mm Allen Wrench
Used for securing the Strut tower retaining nut of most European models
(crucial when adjusting tension of front shocks). The 2/3 open side walls of
this socket allows for easy access of an adjusting wrench.
(normally 7mm Allen Hex Wrench)
(This socket can also be used for R&R of Oxygen Sensor.)
Plus a 7mm Allen Wrench.
The Allen wrench is 7mm and is 7.5 inches Long.
|
242 VW Gearbox Bearing Kit 649.99
| 242 Gearbox Bearing Master Kit
Email for Components and details.
|
242 VW Gearbox Bearing Kit 649.99
|
| 242 Gearbox Bearing Master Kit
Email for Components and details.
|
3 Piece Oil Service Set 27.50
| 3 Piece Oil Service Set includes sizes 36mm, 32mm and 27mm 6 point sockets. (36 mm for M52, M60, M62, M70, M73 engines) Special 36mm Oil Filter Wrench Removes and installs filters on BMW Mini Cooper. The low profile socket fits 36mm fuel and oil filters. The low profile socket works in confined spaces. 3/8 in. drive Not for use with an impact wrench.
BMW Mini Cooper, BMW M52 6 cylinder, BMW M60 8 cylinder, BMW M70 12 cylinder.
Mercedes Benz diesel engines: OM604, OM605, OM606 (1995 W124 E300 diesel, 96 97 W210 E300 diesel, 1998 E300 turbodiesel).
Same as Mercedes tool number: 606 589 01 09 00VW Volkswagen VR6
Also for Ford Truck 6.0L 03 04
Plus you get the 32mm and the 27mm.
27 mm for R&R of oil filter cartridge element.
App.: M163 (Class A), C230 (Compressor)
32 mm for R&R of Oil filter cartridge element.
Applicable: Opel Astra, Corsa, VW Passat, Audi.
|
3 Piece Strut Set 38.00
| On Sale! 22mm Tube Socket Plus Pin Wrench number VW524, Plus 7mm Allen Wrench
Tools used for securing the Strut tower retaining nut of most European models
(crucial when adjusting tension of front shocks). The 2/3 open side walls of
this socket allows for easy access of an adjusting wrench.
(normally 7mm Allen Hex Wrench)
Also for R&R of Oxygen Sensor.
VW524 Pin Wrench Socket with 1/2" drive. This tool is used for R&R of
grooved ring retaining nut on strut tower of front shock absorber.
Also used for adjusting power steering gear on VW Jetta, Golf, GTI.
3 total pieces in this set: 2 Sockets and 7mm Allen Wrench.
The Allen wrench is 7.5 inches long.
|
3 Piece Strut Set 38.00
|
| On Sale! 22mm Tube Socket Plus Pin Wrench number VW524, Plus 7mm Allen Wrench
Tools used for securing the Strut tower retaining nut of most European models
(crucial when adjusting tension of front shocks). The 2/3 open side walls of
this socket allows for easy access of an adjusting wrench.
(normally 7mm Allen Hex Wrench)
Also for R&R of Oxygen Sensor.
VW524 Pin Wrench Socket with 1/2" drive. This tool is used for R&R of
grooved ring retaining nut on strut tower of front shock absorber.
Also used for adjusting power steering gear on VW Jetta, Golf, GTI.
3 total pieces in this set: 2 Sockets and 7mm Allen Wrench.
The Allen wrench is 7.5 inches long.
|
3/4 Drive Breaker Bar 39.99
| 3/4 Drive Breaker Bar Flex Handle
Carbon steel construction
Drop forged for strength
Polished chrome (vanadium) plated finish.
Tool is 19 inches long.
|
32 x 36mm Open End Wrench 39.99
| 32 x 36mm Thin Pattern Metric Open End Wrench
. Chrome Plated Polished Head . Narrow Profile for Easier Access In tight Locations . Satin Chromed Sure Grip Body . Made from 31CRV3 High Performance Tool Steel . Precision Formed For an Exact Fit . OEM Specified By BMW, Mercedes & Rolls Royce . Guaranteed Quality
Made In Germany This wrench mees DIN 3110 / ISO10102 specifications!
|
32mm Open End Thin Wrench 19.99
| Long 32mm Thin Wrench
ON SALE
|
36mm Flare Wrench 42.50
| Special 36mm Flare Wrench like vw 179.
Oil Line 12 Point Wrench for servicing Oil Lines
on most 1977 and Later Porsche 911 and 944 Turbo.
This tool is also used for adjusting rear suspension height
on 77 and Newer Porsche 911
and for camber on most late model Volkswagen Bug.
|
36mm Open End Thin Wrench 19.99
|
| Long 36mm Thin Wrench
ON SALE
|
36mm Socket 3/4 Drive 45.99
| Big Hazet 36mm Socket 6 Point 3/4 Drive size with locking Pin.
World Class Hazet Tools Made in Germany!
For R&R of axle nut
Applicable: BMW E38 and E39 with 36mm 12 point axle nut
|
36mm Wrench VW Audi 15.99
| Oil Tool Audi VW Golf Jetta Passat Eurovan Volkswagen 36mm Oil Service Tool Removes and installs filters 36mm. VW Audi, 1993 Corrado, 2004 Golf R43 3.2 L VR 6, Jetta 2.8L & VR 6, Passat 2.8L & VR 6, Eurovan VR 6 This special tool works well in confined spaces. 3/8 in. drive. This low profile socket will also fit both 36mm fuel (Ford) and oil filters (BMW). mainly for Mini Cooper. Not for use with an impact wrench.
|
41mm Socket 3/4 Drive 54.99
|
| Hazet 41mm Socket 6 Point 3/4 Drive size with locking Pin.
World Class Hazet Tools Made in Germany!
|
5 Point Star Bit Set 19.99
| SECURITY TORX PLUS BIT SET
5 Point Star Security TORX PLUS Insert Bit Set with Mini Ratchet
5 Point set includes sizes TS10, 15, 20, 25, 27, 30, 40
Please note there are 10 total bits and only 7 actual sizes you will get each of the sizes above plus the kit has an extra size 25, 30 and 40 because the 25, 30 and 40 are the popular sizes and tend to wear out (or get lost) faster than the other sizes.
These are Security Torx Plus Tools and they Do NOT work in a standard Torx Fasteners.
Reminder: These are 5 point tools AND THEY ARE TAMPERPROOF VERY RARE AND HARD TO FIND SET!
You will get both the bit set and the mini ratchet with this purchase.
Torx, Torx Plus and Camcar are registered trademarks of Textron, Inc. Torx plus is designed to allow greater torque, and to minimize wear.
|
5mm Ball Tip Hex Socket 21.50
| 5mm Ball Tip Hex Socket 3/8 Drive. Overall Length is 116mm.
Super High Quality Tools Made in Germany!
|
6mm Ball Tip Hex Socket 21.50
|
| 6mm Ball Tip Hex Socket 3/8 Drive. Overall Length is 116mm.
Super High Quality Tools Made in Germany!
|
7 Piece Hex Set 1/2 Dr 32.50
| 7 Piece Hex Set 1/2 Drive. This is a great set for the German car technician. This is a very sturdy 1/2 drive set. Strong One Piece Design. Excellent for oil / transmission service. Sizes included: 19mm, 17mm , 14mm, 12mm, 10mm, 8mm and 7mm. Everyone needs a good strong Hex set and this comes with the large popular sizes needed for European and Asian Auto repair work. A super set to have in the tool box!
|
9 inch Brake Spoon 10.50
| 9 inch BRAKE SPOON
. Drop forged steel
. Chrome plated to resist corrosion.
|
92mm Oil Service Tool 38.00
| High Quality Tools Made in Germany.
Number 2169 1 Hazet Oil Filter Wrench size 92mm.
With square drive nominal size 12.5 = 1/2 inch.
outside hexagon 27 mm.
15 point (inside flats or flutes)
Very useful for Porsche 911 etc...
|
Adjustable Spark Plug Socket 57.50
| Adjustable Spark Plug Socket (13/16) 20.8mm.
Range is 137.5mm up to 197.5 overall.
|
ADJUSTING TOOL 24.95
| FACTORY TOOL USED FOR INSTALLATION AND BASIC SETTING OF THE IGNITION DISTRIBUTOR ON THE 20 VALVE ENGINE
|
Adjustment Guage Pack 29.99
| Adjustment Guage Pack; USED FOR CHECKING AND ADJUSTING BUMPERS ON HOOD LID AND DOOR SEALS. Excellent for the professional or shadetree technician.
|
Air Bag Tool 0
| New Beetle Air Bag Tool
TOOLS USED TO REMOVE AIRBAG ON NEW BEETLE UP TO MODEL YEAR 2000.
|
Airbag Adapter 29.95
| USED TO PREVENT UNINTENTIONAL TRIGGERING OF SIDE AIRBAGS DURING REMOVAL AND INSTALLATION OF THE DRIVER AND PASSENGER SEATS EXCEPT A8
|
Airbag Tool 15.50
| USED FOR RELEASING AIR BAG MODULE ON 3 SPOKE LEATHER STEERING WHEEL IN PASSAT W8. ALSO 3 SPOKE STEERNG WHEEL IN GOLF AND JETTA WITH WOODEN SURROUND. MADE IN GERMANY
|
Ajustable Pin Wrench 35.00
| Ajustable Pin Number 3212 Made in Germany
Applicable: S4, S6, A8, V8. REMOVE INSTALL: 1) VISCOUS CLUTCH RADIATOR FAN
2)CENTRAL HYDRAULIC PUMP PULLEY POPULAR VW AUDI TOOL!
|
Alternator Socket 19.99
| Alternator Socket For mounting the V belt pulley (slip clutch pulley) at the alternator (manuals call it a generator), especially for T.D.I. VW Golf III, Vento, Passat and AUDI A 3
17MM outside dia. Length 30mm. Also for Boxster Alternators with free wheeling Pulleys. The Porsche Number for this tool would be 2592 or PNA 721 048. See repair Group 27 Porsche Bulletins.
|
Angle Tip Relay Plier 9.99
| Angle Tip Relay Plier designed to remove and install relays which are usually located in hard to reach or confined areas. Specially coated tips offer a solid grip on the relay.
|
Angle Type Hose Clamp Plier 17.50
| Angle Type Hose Clamp Plier Keep wire clamps spread open and free both hands. Finger tip "position lock" makes it easy to replace the lower radiator hose. Fits a wide variety of size clamp sizes.
|
Arbor Installer 37.50
| INSTALLATION OF DRIVE FLANGE OIL SEAL AND FRONT BRAKE DISC BRG. GREASE SEAL.
|
ASSEMBLY DEVICE 0.00
| Assembly Kit
Used for replacing crankshaft PTFE seal on engine control side.
|
ASSEMBLY KIT 0.00
| USED WHEN ASSEMBLING PTFE CRANKSHAFT SEAL, FLYWHEEL END
|
ASSEMBLY SET 375.00
| WHEEL BEARING ASSEMBLY SET
USED TO REMOVE AND INSTALL REAR WHEEL HUB AND WHEEL BEARINGS. EUROVAN. Also used to remove and install oil seals in upper cover for camshaft timing chain.
|
ASSEMBLY STAND 3054 0.00
| SUPPORTS ENGINE USED IN CONJUNCTION WITH VW307A AND VW313
|
ASSEMBLY TOOL 0.00
| USED FOR FITTING SEALING FLANGE WITH INTEGRATED SENDER WHEEL.
|
ASSEMBLY TOOL T10047 0.00
| USED WHEN REPLACING THE NEEDLE BEARING (POLYGON BEARING) FOR THE OUTPUT SHAFT /UNIVERSAL JOINT FLANGE.
FACTORY TOOL MADE IN GERMANY
|
ASSEMBLY TOOL T10071 0.00
| USED FOR INSTALLING PTFE CAMSHAFT OIL SEAL.
FACTORY TOOL MADE IN GERMANY
|
ASSEMBLY TOOL T40032 0.00
| REMOVAL AND ASSEMBLY TOOL
USED FOR REMOVING AND INSTALLING REAR AXLE DIFFERENTIAL BEAINGS ON AUDI A4 (B6).
|
ATF FILLER TOOL 0.00
| FILLER TOOL REQUIRED WHEN CHECKING/FILLING 01N 01V AUTOMATIC TRANSMISSIONS WITH ATF
|
Audi Headbolt Toolt 17.50
Audi Press Driver Kit 59.50
| Press Driver Kit VA6001
This set is used for the proper installation of the oil seal into steering rack.
Applicable: Audi model 4000, 5000.
|
Audi VW Headbolt Tool 32.99
| Polydrive Cylinder Head Socket for VW/Audi.
This fits in the new special profile. Ref: Volkswagen number T10070.
This is not a torx and it is not a cheesehead or triple square. This is called Polydrive.
The overall length is 168mm. Shaft length is 130.
Super High Quality Tools Made in Germany by Hazet!
|
Audi VW Pulley Puller 69.00
| T40001 Extractor (Puller) for the camshaft phasing gear with 5 and 6 spokes
6 cylinder engines TDi, engines V6 and V8, AUDI A 4, A 6, A 8
Plus Extraction Hook for the careful extraction of camshaft phasing gear with 5 spokes on VW Audi V8 carburetor engines. Puller set used to remove camshaft sprockets Audi VW camshafts. Applicable: , AUM, AUX, AUG, AWV, AWW, AEB, AHA, AKB, ALH, APB, APH, ART, ATC, ATQ, ATW, AWD, AWM, AWN & AWP
Pulling arms 17 and 23mm. This information is available in your factory manual or the CD.
|
Audi VW Pulley Puller 69.00
|
| T40001 Extractor (Puller) for the camshaft phasing gear with 5 and 6 spokes
6 cylinder engines TDi, engines V6 and V8, AUDI A 4, A 6, A 8
Plus Extraction Hook for the careful extraction of camshaft phasing gear with 5 spokes on VW Audi V8 carburetor engines. Puller set used to remove camshaft sprockets Audi VW camshafts. Applicable: , AUM, AUX, AUG, AWV, AWW, AEB, AHA, AKB, ALH, APB, APH, ART, ATC, ATQ, ATW, AWD, AWM, AWN & AWP
Pulling arms 17 and 23mm. This information is available in your factory manual or the CD.
|
Audi VW Pulley Puller 69.00
|
| T40001 Extractor (Puller) for the camshaft phasing gear with 5 and 6 spokes
6 cylinder engines TDi, engines V6 and V8, AUDI A 4, A 6, A 8
Plus Extraction Hook for the careful extraction of camshaft phasing gear with 5 spokes on VW Audi V8 carburetor engines. Puller set used to remove camshaft sprockets Audi VW camshafts. Applicable: , AUM, AUX, AUG, AWV, AWW, AEB, AHA, AKB, ALH, APB, APH, ART, ATC, ATQ, ATW, AWD, AWM, AWN & AWP
Pulling arms 17 and 23mm. This information is available in your factory manual or the CD.
|
Automatic Wire Strippers 00
| Wire Strippers
Black plastic housing with integrated side cutter for wire cutting.
For cable 0.5 up to 4.0 mm wire diameter.
|
Axle Nut Removal Tool 11.95
| Axle Nut Removal Tool 36mm
|
B90 for Volkswagen and Audi 369.00
| Designed to accurately and efficiently
Extract or Install Hubs and Wheel Bearings of spindle assemblies.
Applicable: All Front wheel drive VW (Water cooled) and Audi
from early 1970 to present with S.R.W.B. and I.F.S. including A.W.D.
Pictures are for reference only.
This is the Volkswagen Audi Kit.
The Volkswagen kit "only" available below.
|
B90 for Volkswagen Audi 369.00
|
| Designed to accurately and efficiently
Extract or Install Hubs and Wheel Bearings of spindle assemblies.
Applicable: All Front wheel drive VW (Water cooled) and Audi
from early 1970 to present with S.R.W.B. and I.F.S. including A.W.D.
Pictures are for reference only.
This is the Volkswagen Audi Kit.
The Volkswagen kit "only" available below.
|
B90 Volkswagen Only 314.00
|
| This is a Volkswagen Kit only. Designed to accurately and efficiently
Extract or Install Hubs and Wheel Bearings of spindle assemblies. No Audi Components in this kit.
|
Ball Allen Set SAE & Metric 14.50
| 22 pc BALL TIP HEX KEY SET Ball end wrenches are perfect for quick and convenient access to screw heads at angles up to 25 SAE shank sizes: 0.05, 1/16, 5/64, 3/32, 7/64, 1/8, 9/64, 5/32, 3/16, 7/32, 1/4, 5/16 and 3/8" Metric shank sizes: 1.5, 2, 2.5, 3, 4, 5, 6, 8 and 10mm
Alloy steel construction excellent for the German car fanatic.
|
Ball Hex Long Pattern 12.50
| Long Pattern
9 Piece Ball Type Hex Key Set
Sizes 1.5mm thru 10mm
|
BALL HEX SOCKET 27.50
| LONG HEX EXTENSION USED TO REMOVE/INST ALL AND TORQUEING KNOCK SENSORS. V6 ENGINE
|
Ball Hex Socket 29.95
| Ball Hex Socket T10058 Original Factory Tool Made in Germany: USED FOR M6 DISMANTLING AND INSTALLING OF OIL PANS. REPLACES OLD NUMBER 3249
|
BALL JOINT PULLER 0.00
Ball Joint Puller 18 22mm 34.99
| Universal (18 22mm opening) Ball joint Puller, galvanized.
Specifications:
Once the puller is positioned on the pin by adjusting the central screw,
the joint is removed by turning the side screw.
|
Ball Joint Tool Set 70.00
| Set of two tools
First tool (top of image)
pictured is a Universal tool is used to separate the ball joint from the spindle support arm. It works on many domestic and import front wheel drive vehicles, and is adjustable for diffrent size ball joints. Using the correct ball joint tool makes a tough job much easier. Factory ball joints are pressed in tight, if you damage the ball joint, the situation gets ugly.
Two Stage Ball joint tool Special steel, galvanized, for removing the ball pivots of steering arms, stabilizers etc.
Plus Universal Ball joint Puller (18 22mm opening), light series, galvanized Specifications Once the puller is positioned on the pin by adjusting the central screw, the joint is removed by turning the side screw. You get both tools with this purchase.
|
Ball Torx L Key * Hot 36.50
| Ball Torx L Key * 7 Pc Set Hot
Torx L Key Set 7 Size: Tamperproof T 10, T 15, T 20, T 25, T 27, T 30, T 40 Torx This is a SUPER set
Ball Torx on one end (RARE) and TAMPERPROOF Torx on the other end.
Size Range: T10 T40 Color: Black W/Green Plastic Sleeve
|
Ball Torx L Key Set 8 36.99
|
| Picture is for reference only. This is a 8 Piece Set
Ball Torx L Key Set 8 Pc.
Size: T9, T 10, T 15, T 20, T 25, T 27, T 35, T 40 Torx This is a SUPER set
Ball Torx on one end and standard Torx on the other end.
(please note:this set does not include the popular T30 size)
|
Bar and Pin for 5 Valve 119.00
| Camshaft Timing Tool Set (2)
TOOL REF 3391
Cam/Bar Holder
V6 / 5 valves per cylinder/
used for the crucial task of securing both engine banks/
camshafts at T.D.C when replacing the timing belt/
to properly align camshaft during timing belt change /head assembly work.
Applicable VW Audi V6 5 Valve 1998 2003
Cam/Bar Holder Not Applicable 3.0 2002 4 cam.
TOOL REF 3242
Crankshaft T.D.C. Lock Pin
Holds crankshaft at top dead center
For installing or removing toothed belt /flywheel drive plate.
T.D.C. Pin Applicable: A4 A6 Volkswagen Passat
Engine Applicable: Volkswagen AHA BDP ATQ BCY
Audi AAH AFC ATQ AHA AKB ART AUX BFM BHF BNK BSB AVK AWN AYS BBD BCY & BEL
T.D.C. Pin Not Applicable 3.0 V6
Please note: 3391 for 5 valves per cylinder.
|
Bar and Pin for 5 Valve 119.00
|
| Camshaft Timing Tool Set (2)
TOOL REF 3391
Cam/Bar Holder
V6 / 5 valves per cylinder/
used for the crucial task of securing both engine banks/
camshafts at T.D.C when replacing the timing belt/
to properly align camshaft during timing belt change /head assembly work.
Applicable VW Audi V6 5 Valve 1998 2003
Cam/Bar Holder Not Applicable 3.0 2002 4 cam.
TOOL REF 3242
Crankshaft T.D.C. Lock Pin
Holds crankshaft at top dead center
For installing or removing toothed belt /flywheel drive plate.
T.D.C. Pin Applicable: A4 A6 Volkswagen Passat
Engine Applicable: Volkswagen AHA BDP ATQ BCY
Audi AAH AFC ATQ AHA AKB ART AUX BFM BHF BNK BSB AVK AWN AYS BBD BCY & BEL
T.D.C. Pin Not Applicable 3.0 V6
Please note: 3391 for 5 valves per cylinder.
|
Bar and Pin for 5 Valve 119.00
|
| Camshaft Timing Tool Set (2)
TOOL REF 3391
Cam/Bar Holder
V6 / 5 valves per cylinder/
used for the crucial task of securing both engine banks/
camshafts at T.D.C when replacing the timing belt/
to properly align camshaft during timing belt change /head assembly work.
Applicable VW Audi V6 5 Valve 1998 2003
Cam/Bar Holder Not Applicable 3.0 2002 4 cam.
TOOL REF 3242
Crankshaft T.D.C. Lock Pin
Holds crankshaft at top dead center
For installing or removing toothed belt /flywheel drive plate.
T.D.C. Pin Applicable: A4 A6 Volkswagen Passat
Engine Applicable: Volkswagen AHA BDP ATQ BCY
Audi AAH AFC ATQ AHA AKB ART AUX BFM BHF BNK BSB AVK AWN AYS BBD BCY & BEL
T.D.C. Pin Not Applicable 3.0 V6
Please note: 3391 for 5 valves per cylinder.
|
Belt Tension Guage 49.95
| Belt Tension Guage Special Tool used to adjust the tension on the cam belt where the movement of timing belt is measured by load (NM). Suitable for use on cam belts various belt widths. Easy to use. Clear incremental marking with knurled knob for precise measurement. Dual scale allows reading from top or bottom of tool.
|
Bench Head Stand 34.99
| NUMBER ZDM HDSTAND
Bench Head Stand Set
Aluminum & Steel Heads
This Head Stand set has been designed for use on most cylinder heads.
In operation, it holds the head off the bench for valve work,
head cleaning and assembly.
Its holding rods have a log 5 inch taper which allows them to go further into the stud hole
for more contact in the hole and a firmer grip on the head.
These holding rods are also heat treated to remain smooth for use on aluminum heads.
|
Bench Head Stand 34.99
|
| NUMBER ZDM HDSTAND
Bench Head Stand Set
Aluminum & Steel Heads
This Head Stand set has been designed for use on most cylinder heads.
In operation, it holds the head off the bench for valve work,
head cleaning and assembly.
Its holding rods have a log 5 inch taper which allows them to go further into the stud hole
for more contact in the hole and a firmer grip on the head.
These holding rods are also heat treated to remain smooth for use on aluminum heads.
|
Best Quality XZN Size M16 49.50
| This is a Special Tamperproof Transmission Drain Plug Socket. Triple Square ( 12 Point XZN 16) Same as old Volkswagen Tool 3357. (Number 3357 is still found in many/most manuals for this job)
Applicable Porsche Boxster and Audi A4 A6 and Passat. This is an excellent high quality tool Made in Germany.
* Plug not included, picture is for reference only.
|
Big Daddy Master Hex Set 89.50
| This is a big Master Hex Socket Set
Metric and SAE
Get yours now. Comes with all the popular METRIC sizes for working on European
vehicles plus all the SAE bonus sockets!
Metric sizes are: 19, 17, 14, 12, 10, 9, 8, 7, 6, 5, 4,
3, 2.5.
SAE 3/4, 5/8, 9/16, 1/2, 7/16, 3/8, 5/16, 1/4, 7/32, 3/16, 5/32, 9/64, 1/8 inch.
Metric Hex Drivers 2mm thru 19mm SAE, Fractional Drivers 3/32'' thru 3/4''
All bits are S2 steel, the best bits available Chrome Bit holders, with
diamond knurl for fingertip control Drivers have 1/4'', 3/8'' or 1/2''
square drives Plastic storage case Press fit bits & holders.
Lifetime Warranty
|
BIT SET 0.00
| USED FOR REMOVING/INSTALLING BOLTS FROM ENGINE TO GEARBOX. 09A/09B 5 SPEED AUTOMATIC GEARBOX.
|
Bonus Torx and Star Set 29.95
|
| Check it out....SECURITY TORX BONUS SET Here is what you get: 5 Point Star Security TORX PLUS Insert Bit Set with Mini Ratchet The 5 Point set includes sizes TS10, 15, 20, 25, 27, 30, 40 Please note there are 10 total bits and only 7 actual sizes in the 5 POINT set you will get each of the sizes mentioned above plus the 5 POINT kit has extra (spare) sizes 25, 30 and 40 the popular sizes tend to wear out or get lost faster. These are 5 point Security Torx Plus Tools and they Do NOT work in a standard Torx Fasteners. (see set below) . Very rare and hard to find a set like this with both types of bits.
The 6 POINT TORX SET includes mainly Tamperproof Torx. The seven bits on the left side are tamperproof, plus this set includes a number 1 and number 2 Phillips and a flat head bit. The Torx sizes in this set are: T10, T15, T20, T25, T30, T40 The bits in this set are also tamperproof. Torx, Torx Plus and Camcar are registered trademarks of Textron, Inc. Torx and Star bits are designed to allow greater torque, and to minimize wear.
You will get all items shown here including 2 sets of bits and two Mini ratchets with this purchase.
|
Bonus Triple Square Set 5 49.99
| 12 Point Headbolt Tools Plus Drain Plug Socket. (Anyone looking knows how hard it is to find a good price on XZN Tools here you have the extremely popular size 10 and more...)
The Headbolt Set of 4 Includes: 6mm, 8mm, 10mm & 12mm
with 3/8 Drive holders on a rail.
Plus you get
Drain Plug Socket (Upper Left)
Special Large size M16
(Notice the Tamperproof Center on the M16)
Drain Plug Socket Triple Square (12 Point = XZN )
For Porsche Boxster and Audi A4, A6 and Passat
A very handy set for the VW, Audi, Porsche and German car mechanic.
Note: The 4 pieces (Right) are regular XZN and the drainplug tool is tamperproof.
You will get all five pieces with this purchase.
|
BRACKET 3256 144.50
| FACTORY TOOL USED TO REMOVE/INSTALL VIBRATION DAMPER
|
Brake Bleeder Wrench 9mm 9.99
| Offset Brake Bleeding Wrench 9mm x 7mm.
|
Brake Bleeding Wrench 9mm 28.50
| Brake Bleeding wrench 9mm. Made in Germany.
|
Brake Caliper Rewind Set 49.50
| U.S./EURO/ASIAN/4WD VEHICLES
Disc Brake Pad & Caliper Service Tool Kit
Includes 8 adapters Magnetic socket adapter.
For brake assemblies
For rotating pistons back into caliper to provide clearance for new pads
Prevents damage to the piston and boot
Designed for use with Mercedes, BMW, Volkswagen, GM, Audi, Ford,
Honda, Subaru, Mazda, Nissan, Mitsubishi, Toyota, Land Rover and 4 wheel drive vehicles.
Blow molded carryingcase for easy storage.
|
Brake Caliper Rewind Set 49.50
|
| U.S./EURO/ASIAN/4WD VEHICLES
Disc Brake Pad & Caliper Service Tool Kit
Includes 8 adapters Magnetic socket adapter.
For brake assemblies
For rotating pistons back into caliper to provide clearance for new pads
Prevents damage to the piston and boot
Designed for use with Mercedes, BMW, Volkswagen, GM, Audi, Ford,
Honda, Subaru, Mazda, Nissan, Mitsubishi, Toyota, Land Rover and 4 wheel drive vehicles.
Blow molded carryingcase for easy storage.
|
Brake Caliper Tool 96.50
| T10165 Brake Caliper Tool
The old number for this tool was 3272
(discontinued)
T10165 is the correct current factory number for this tool.
Some Vehicles include: Beetle 1.8 Turbo
(see your manual for exact year model applications tool number T10165 or old number 3272 same as T10165)
Beetle 4 CYL , Beetle TDI Diesel , Corrado SLC V6 ,
Golf Cabrio IV GL , Golf Cabrio IV GLX , Golf III GL 4 CYL ,
Golf III GTI 4 CYL , Golf III GTI VR6 , Golf III TDI Diesel , Golf IV 4 CYL ,
Golf IV GL 4 CYL , Golf IV GLS 4 CYL, Golf IV GTI 1.8 Turbo ,
Golf IV GTI VR6 AFP , Golf IV TDI Diesel , Golf IV VR6 AFP ,
Jetta III GL 4 CYL , Jetta III GLS 4 CYL , Jetta III GLX VR6 ,
Jetta III TDI Diesel , Jetta IV 1.8 Turbo , Jetta IV GL 4 CYL ,
Jetta IV GLS 4 CYL , Jetta IV GLS VR6 AFP , Jetta IV GLX VR6 AFP,
Jetta IV TDI Diesel , Jetta Wagon 1.8 Turbo , Jetta Wagon 1.9 TDI ALH ,
Jetta Wagon 4 CYL AZG / AVH, Passat TDI Diesel ,
Passat V6 30V AHA / ATQ , PassatTurbo 20V AEB
|
Brake Caliper Tool 96.50
|
| T10165 Brake Caliper Tool
The old number for this tool was 3272
(discontinued)
T10165 is the correct current factory number for this tool.
Some Vehicles include: Beetle 1.8 Turbo
(see your manual for exact year model applications tool number T10165 or old number 3272 same as T10165)
Beetle 4 CYL , Beetle TDI Diesel , Corrado SLC V6 ,
Golf Cabrio IV GL , Golf Cabrio IV GLX , Golf III GL 4 CYL ,
Golf III GTI 4 CYL , Golf III GTI VR6 , Golf III TDI Diesel , Golf IV 4 CYL ,
Golf IV GL 4 CYL , Golf IV GLS 4 CYL, Golf IV GTI 1.8 Turbo ,
Golf IV GTI VR6 AFP , Golf IV TDI Diesel , Golf IV VR6 AFP ,
Jetta III GL 4 CYL , Jetta III GLS 4 CYL , Jetta III GLX VR6 ,
Jetta III TDI Diesel , Jetta IV 1.8 Turbo , Jetta IV GL 4 CYL ,
Jetta IV GLS 4 CYL , Jetta IV GLS VR6 AFP , Jetta IV GLX VR6 AFP,
Jetta IV TDI Diesel , Jetta Wagon 1.8 Turbo , Jetta Wagon 1.9 TDI ALH ,
Jetta Wagon 4 CYL AZG / AVH, Passat TDI Diesel ,
Passat V6 30V AHA / ATQ , PassatTurbo 20V AEB
|
Brake Pad Spreader 14.99
| Disk Brake Pad Spreader
Tool used for changing brake pads easy!
The tool compresses inner brake pad, resets piston for easy pad replacement.
Durable heavy duty construction.
|
Brake Piston Tool 14.99
| Disc Brake Piston Cube Tool has 5 different drive pin configurations designed to rotate the parking brake activated piston back into the caliper cylinder when replacing worn pads on vehicles equipped with 4 wheel disc brakes. Tool will service many domestic and import cars. This tool will work in place of special tool 3272. Some Audi VW calipers (mid 80s) use a hex tool check yours to be certain a pain in the neck if you have never done them before. Grind or file off two diagonally opposite corner pins to allow the cube to fit the vw rear brake piston. Use with a 3/8" ratchet. It can be easier to fasten the rear caliper back onto the carrier without the rotor in place while using this tool. That way you get a little extra leverage. Use as follows: engage the two prongs and turn the piston 180 clockwise. Remove the tool. Use a generic calper tool or a c clamp and push the piston in about 2mm. Keep alternating back and forth between the cube tool and the c clamp until the piston in almost all the way in. If you are strong enough, you may not even need the c clamp just push with the cube tool as you turn. Instead of the cube, you can even use needle nose pliers, but then you defintiely need the c clamp. The rear brakes can be rather difficult, so make sure you have plenty of time. Also for use on most popular imports and Chrysler, Ford and GM vehicles with 4 wheel disc brakes.
|
Brake Tool 25.00
| NUMBER 3289
Brake Release Tool Volkswagen VR6 Jetta
Tool is used to disconnect brake pedal from booster.
This is an Original VW Factory Tool
Made in Germany for Volkswagen By Kukko*
|
Brake Tool 8.99
| BRAKE SPRING COMPRESSOR
For removal and replacement of backing plate springs, cups & pins
Pro style heat resistant handle
Improved tip design grips parts more securely
|
BRAKE TOOL 3343 0.00
| ADJUSTMENT WRENCH USED WHEN ADJUSTING PARKING BRAKE. (REPAIR GROUP 46)
|
Caliper Tool 19.99
| SPANNER SOCKET RR CALIPER USED TO TURN THE REAR BRAKE CALIPER PISTONS WHEN REPLACING BRAKE PADS
|
CAM & CRANK TOOLS 127.50
| FOR INSTALLATION OF CRANKSHAFT PULLEY INTERMEDIATE SHAFT & CAMSHAFT OIL SEALS.
4 PIECE TOOL SET
|
CAM & CRANK TOOLS 127.50
|
| FOR INSTALLATION OF CRANKSHAFT PULLEY INTERMEDIATE SHAFT & CAMSHAFT OIL SEALS.
4 PIECE TOOL SET
|
Cam Adjuster Set 4 289.00
| CAM KIT 4 INCLUDES NUMBERS T40030, T40028, T40026 & T40011. KIT USED FOR LOCKING AND COUNTER HOLDING CAMSHAFT.
|
Cam Adjuster Tools 269.50
| Cam Tool Kit T10030 Original Factory Tool Made in Germany: USED FOR LOCKING AND COUNTER HOLDING CAMSHAFT
|
Cam Adjuster Tools 269.50
|
| Cam Tool Kit T10030 Original Factory Tool Made in Germany: USED FOR LOCKING AND COUNTER HOLDING CAMSHAFT SHOULD BE USED IN CONJUNCTION WITH TOOL NUMBERS T40028, T40011 AND T40026.
|
CAM ADJUSTMENT KIT 155.00
| LOCATE CAMSHAFT WHEN ADJUSTING TIMING PLEASE CHECK MANUALS FOR NUMBER 3199 BEFORE ORDERING.
|
Cam Bar and Pin for 2 Valve 119.00
| Camshaft Timing
Tool Set (2)
TOOL REF 3243
Cam/Bar Holder 2 valves per cylinder/
Used for the crucial task of securing both engine banks/
camshafts at T.D.C when replacing the timing belt/
to properly align camshaft during belt change head assembly work.
Applicable Audi 90 A6 A4 94 97 AFC Engine
TOOL REF 3242
Crankshaft T.D.C. Lock Pin
Holds crankshaft at top dead center
For installing or removing toothed belt /flywheel drive plate.
T.D.C. Pin Applicable: A4 A6 Volkswagen Passat
Engine Applicable: Volkswagen AHA BDP ATQ BCY
Audi AAH AFC ATQ AHA AKB ART AUX BFM BHF
BNK BSB AVK AWN AYS BBD BCY & BEL
T.D.C. Pin Not Applicable 3.0 V6
Please note: 3243 for 2 valves per cylinder.
|
Cam Bar and Pin for 2 Valve 119.00
|
| Camshaft Timing
Tool Set (2)
TOOL REF 3243
Cam/Bar Holder 2 valves per cylinder/
Used for the crucial task of securing both engine banks/
camshafts at T.D.C when replacing the timing belt/
to properly align camshaft during belt change head assembly work.
Applicable Audi 90 A6 A4 94 97 AFC Engine
TOOL REF 3242
Crankshaft T.D.C. Lock Pin
Holds crankshaft at top dead center
For installing or removing toothed belt /flywheel drive plate.
T.D.C. Pin Applicable: A4 A6 Volkswagen Passat
Engine Applicable: Volkswagen AHA BDP ATQ BCY
Audi AAH AFC ATQ AHA AKB ART AUX BFM BHF
BNK BSB AVK AWN AYS BBD BCY & BEL
T.D.C. Pin Not Applicable 3.0 V6
Please note: 3243 for 2 valves per cylinder.
|
Cam Bar and Pin for 2 Valve 119.00
|
| Camshaft Timing
Tool Set (2)
TOOL REF 3243
Cam/Bar Holder 2 valves per cylinder/
Used for the crucial task of securing both engine banks/
camshafts at T.D.C when replacing the timing belt/
to properly align camshaft during belt change head assembly work.
Applicable Audi 90 A6 A4 94 97 AFC Engine
TOOL REF 3242
Crankshaft T.D.C. Lock Pin
Holds crankshaft at top dead center
For installing or removing toothed belt /flywheel drive plate.
T.D.C. Pin Applicable: A4 A6 Volkswagen Passat
Engine Applicable: Volkswagen AHA BDP ATQ BCY
Audi AAH AFC ATQ AHA AKB ART AUX BFM BHF
BNK BSB AVK AWN AYS BBD BCY & BEL
T.D.C. Pin Not Applicable 3.0 V6
Please note: 3243 for 2 valves per cylinder.
|
Cam Bar for 2 Valve 99.95
| Camshaft Securing Bar Timing Tool
TOOL REF 3243
Cam/Bar Holder 2 valves per cylinder/
Used for the crucial task of securing both engine banks/
camshafts at T.D.C when replacing the timing belt/
to properly align camshaft during belt change head assembly work.
Applicable Audi 90 A6 A4 94 97 AFC Engine
Please note: 3243 Securing Bar for
2 valves per cylinder.
|
Cam Bar for 2 Valve 99.95
|
| Camshaft Securing Bar Timing Tool
TOOL REF 3243
Cam/Bar Holder 2 valves per cylinder/
Used for the crucial task of securing both engine banks/
camshafts at T.D.C when replacing the timing belt/
to properly align camshaft during belt change head assembly work.
Applicable Audi 90 A6 A4 94 97 AFC Engine
Please note: 3243 Securing Bar for
2 valves per cylinder.
|
Cam Bar for 5 Valve 99.95
| Camshaft Timing Tool Securing Bar
TOOL REF 3391
Cam Securing Bar Holder
V6 / 5 valves per cylinder/
used for the crucial task of securing both engine banks/
camshafts at T.D.C when replacing the timing belt/
to properly align camshaft during timing belt change /head assembly work.
Applicable VW Audi V6 5 Valve 1998 2003
Cam/Bar Holder Not Applicable 3.0 (2002 4 cam)
Please note: 3391 for 5 valves per cylinder.
|
Cam Bar for 5 Valve 99.95
|
| Camshaft Timing Tool Securing Bar
TOOL REF 3391
Cam Securing Bar Holder
V6 / 5 valves per cylinder/
used for the crucial task of securing both engine banks/
camshafts at T.D.C when replacing the timing belt/
to properly align camshaft during timing belt change /head assembly work.
Applicable VW Audi V6 5 Valve 1998 2003
Cam/Bar Holder Not Applicable 3.0 (2002 4 cam)
Please note: 3391 for 5 valves per cylinder.
|
Cam Shaft Locking Plate 16.99
| Cam Shaft Locking Plate 2065A
Used for securing the cam shaft from rotating
and maintaining correct timing position during R&R of cam shaft drive belt.
All VW Audi Diesel and Volvo D24 6 Cylinder 2.4L diesel 1981 86 engines.
|
CAM TOOL T40049 0.00
| Used for turning crankshaft over when removing and installling camshaft timing chain.
|
Camber Adjustment Tool 18.75
| VA6004
Camber Adjustment Tool
For proper alignment of camber VW Dasher Fox
Same as old VW number 4471
|
CAMSHAFT BAR 0.00
| USED FOR LOCKING CAMSHAFT WITHOUT REMOVING CLINDER HEAD COVER. USED ON 4 DIESEL ENGINE.
|
Camshaft Locating Fixtures 150.00
| Timing tools sold as a set (2) pieces.
Camshaft positioners, number 3341 especially for Audi A8.
|
Camshaft Locating Fixtures 150.00
|
| Timing tools sold as a set (2) pieces.
Camshaft positioners, number 3341 especially for Audi A8.
|
CENTERING PLATE 18.50
| CENTERING PLATE USED FOR CENTERING OF THE DRIVE PLATE WHEN ASSENBLING THE CLUTCH ON THE 16 VALVE ENGINE
|
Chain Adjuster 24.50
| 3366 CHAIN ADJUSTER Required to change the troublesome
cam adjuster seal on Audi and Volkswagen 4, 6 (2.7 and 2.8) and 8 Cyl With 5
Valve per Cyl. Also Audi VW 1.8 Golf Jetta Passat New Beetle The manual says to
remove both camshafts to change the seal ... BUT using this tool you can relieve
the tension on the camshaft chain and lift it up far enough to clean, remove and
replace the gasket and seal. This procedure not only saves time but saves any
other damage that may happen to camshafts and bearings by removing them.
Original Factory Tool Made in Germany by Matra
|
Chain Adjuster 24.50
|
| 3366 CHAIN ADJUSTER Required to change the troublesome
cam adjuster seal on Audi and Volkswagen 4, 6 (2.7 and 2.8) and 8 Cyl With 5
Valve per Cyl. Also Audi VW 1.8 Golf Jetta Passat New Beetle The manual says to
remove both camshafts to change the seal ... BUT using this tool you can relieve
the tension on the camshaft chain and lift it up far enough to clean, remove and
replace the gasket and seal. This procedure not only saves time but saves any
other damage that may happen to camshafts and bearings by removing them.
Original Factory Tool Made in Germany by Matra
|
CIS Injector Puller 13.99
| Number 1123/4
CIS Injector Puller tool used to easily remove CIS fuel injectors on many in line engines.
In operation, this tool fits around the injector base and with a screwdriver
(used as a lever put into the slots of the tool)
simply "POP" the injector out, without damage to the injector hose.
Applications include: All Gas Water Cooled Volkswagen,
Porsche 924 and Audi 4000, 5000 with mechanical fuel injectors.
High quality Cis and Cis E fuel injector puller tool
This is by far one of the more useful tools in the shop.
If you have ever attempted the "two screwdriver technique" you will know it can be tricky. Injectors are proned to rusting when they have been in the head for a long period of time, they become lodged in there and are next to impossible | |
